Model Kit Reviews: Metal Earth Drum Set

This particular model kit from Metal Earth surpassed expectations and is incredibly rewarding to make.

The quality of the metal that was used for the kit was sufficient. It can be easily bent into place or position however it is quite brittle. You can probably bend the tiny parts twice at most before they break; so make sure you build them with care. This kit will definitely make you break a sweat especially if you want to use every part. It also came with its own stand which is essential and awesome.

This kit can be a nightmare to build without the right tools. People with big hands and fingers may get frustrated trying to put this thing together since the parts are quite small. The details that are in this kit are surprisingly intricate; and comparing it to it’s full scale counterpart, it is quite the resemblance.

Overall, this kit was great. The details on the kit surpassed expectations and will give amateur hobbyists a much needed headache.

If you ever bought a Metal Earth, please tell me about it in the comments and share this review to someone who hasn’t!

Advertisements

Review-In-Progress: Metal Earth Drum Set Build Log (Part 4)

Today is the final entry for my build log of the Metal Earth: Drum Set. I have decided to make a video highlighting the final steps of the build; Check it out:

Here is the finished product:

img_0489

Final product of the “Metal Earth: Drum Set” model kit. Oct. 22, 2016

The overall build wasn’t that bad considering there are a lot of missing parts. Thanks for keeping up with all the build logs! If you like this type of content, share it with your friends! Comment if you have any complaints and wait for my review of the product itself! Thanks everyone!

Review-In-Progress: Metal Earth Drum Set Build (Part 3)

Greetings readers! I’m back for the new “Review-In-Progress” series of this blog! Today we will be continuing on the Metal Earth Drum Set! This time is for the snare drum!

The snare drum part of the this kit is weirdly hard to assemble. Like always I used the “marker mold” technique to form the snare drum just like any of the tom.

img_0383

Completed Metal Earth snare drum. Oct. 20, 2016

Placing the header of the snare was the easiest part of this section because like any header in this kit you just simply plop it on top and secure it.

The snare rim follow the same procedure as the headers; just plop it on and secure it. However, be careful about bending the four tiny pieces that points up to secure the snare rim. They tend to break after only a few bends, so make sure to not make any mistakes.

This part of the build is the first piece to use the stands. They are a pain to put on! First, two of the stands have to be combined together to form the feet for the snare drum. Once you have done that, you have to lodge it to the bottom base of the snare drum. I tried to secure the feet on the bottom by bending four teeth that is used to go in the base but, no bueno  seniores…

Finally, I just gave up and super glued the dang thing… I am sorry that I have failed you, my fellow readers. Now that I have used the super glue, I gotta say that this is essential to this build if you are easily frustrated because it would save you a lot of them!

img_0382

Snare drum stand installed (with super glue) Oct. 20, 2016.

Well, that is it for “Review-In-Progress!” I hope you guys liked it. I will probably be doing more of this series for the blog in the future. If you like the content, please share it with your friends and comment if you have a complaint! Thanks and goodbye!

Review-In-Progress: Metal Earth Drum Set Build (Part 2)

Today, I will be tackling the rest of the bass drum and the floor tom part of the Metal Earth: Drum Set model kit!

img_0367

The bass drum only need the stand that goes in the front so I didn’t have as much trouble as I did. Like I said before, these Metal Earth kits takes time and patience because the sheets are so finicky and fragile; one wrong move could easily ruin your build.

img_0358

Bass drum completed with the front stand (without aesthetic band). Oct. 19, 2016

I finally figured out how to put those metal bands for aesthetics on the drums; however, I opted to not put them at all because it is just a pain. Maybe I will put them on late when I have all the pieces together.  To be honest, I prefer not to have them on.

img_0359

The aesthetic band that goes around the perimeter of the bass drum. Oct. 19, 2016

The floor tom was probably the easiest part I have done in this kit so far. My experience from the previous parts definitely helped when assembling the rest; you learn as you go.

img_0366

Floor tom finished (without aesthetic band). Oct. 19, 2016

Again, a permanent marker helped a lot on forming the cylindrical shape of the floor tom body. I used a slightly larger marker to shape it and it worked perfectly. Thanks Sharpie! Give me money! Just kidding, but all kidding aside use this technique when building this kit. It is a life saver!

img_0363

Forming the floor tom using a permanent marker. Oct, 19 2016.

I elected to forgo the aesthetic band here as well to save time and frustrations. It breaks my heart but, I have to do my math homework!

Anyway, if you like to see the rest of the review process of Metal Earth, stay tuned on this blog! If you want to tell me I suck, just send me an email through the “Contacts” tab or comment! If you like this kind of stuff, please stick around for more!

 

Review-In-Progress: Metal Earth Drum Set Build (Part 1)

I have never tried a Metal Earth kit in my life. I’ve always thought they looked very cool but I tend to stay away from them because they look difficult. Well, I my aunt got me one for my birthday. Little did I know that these metal sheets were a nightmare to build! Today, I will take you to the first part of my build with a Metal Earth kit and how did it go.

IMG_0252

The first concern with this build that I had was that working with the flimsy parts. Getting them out of the mold was a nightmare without bending them. You must use some kind of cutting tool, perhaps scissors or the recommended Metal Earth cutters that is sold separately.

IMG_0249

Other thing you have to know is that with this particular kit you have to shape the toms sheets into cylinders yourself which isn’t too much problem for me. I just shaped them using markers that I have laying around. IMG_0247

You can see some metals that are sticking out from the perimeter of the toms; those are essential and extremely fragile. Careful not to bend them until you are certain with final position. It also doesn’t help that I have sausage fingers. After a lot of patience, I finished the toms. I have to admit, even though I broke some of the cosmetic parts of the toms, they still look good. Sorry of the pictures being out of focus, I was trying to capture the moment as it happens!

IMG_0248//embedr.flickr.com/assets/client-code.js

Google Maps: My model-making destinations in the Bay Area

Hello Everyone,

Just in case you didn’t know (or have not read my “about” section), I live in the Bay Area and I have put together a map that has destinations that are can be essential to your model-making if you live here! These are just some of the places that I either visited or want to visit. Remember, this blog is all about you and me sharing the world of miniatures; and If you have visited the place that I have not, please tell me about it by commenting or email. I also took the time to take some pictures; so you better be grateful! I’m just playing around. Check out the Google Map down below:

If you like this map, please share it to your model-making, diorama-drafting, and artsy-fart-sy friends! Also leave a comment if there is anything you want me to know like how to improve the blog or just to tell me if I suck! Thanks!